Hi
I have some problem with warm up duration on my server.
Duration is always set to 8 seconds (a little bit short i think )
I have modified modescript_settings.xml --> no effect
I have modified warmup duration value in the script --> no effect
I have modified the value in the matchsetting file --> no effect
Someone can help the little padawan ?
Thanks
Warm-Up duration problem in "CUP" mode...
Moderator: NADEO
Re: Warm-Up duration problem in "CUP" mode...
Hi
Are you using the scripted version of the Cup game mode?
If yes you should have access to two settings:
In your matchsettings file you should see the two settings:
By default they are commented, you need to remove the <!-- and --> around the settings and set the correct value.
Are you using the scripted version of the Cup game mode?
If yes you should have access to two settings:
- S_WarmUpNb -> the number of warm up rounds at the beginning of each map
- S_WarmUpDuration -> the duration of one round of warm up in seconds
In your matchsettings file you should see the two settings:
Code: Select all
<script_settings>
<!-- <setting name="S_WarmUpNb" type="integer" value="0"/> -->
<!-- <setting name="S_WarmUpDuration" type="integer" value="0"/> -->
</script_settings>
Re: Warm-Up duration problem in "CUP" mode...
Ok, thanks for answer.
But the problem is not fix.
I have this in "Cup.Script.txt" :
I have this in the matchsettings.txt file :
My server CUP is set to 3 round on a map before skipping and 1 warmup of 180s before each new map.
It seems that the warmup duration is good when i launch the server but after skipping the first map, the warmup duration is 8s !
Another thing ! You can also set these values in the "modescript_settings.xml" of uaseco !
Values are (for me) :
Which file is the most important ?
Any idea ?
But the problem is not fix.
I have this in "Cup.Script.txt" :
Code: Select all
#Setting S_WarmUpNb 1 as _("Number of warm up :")
#Setting S_WarmUpDuration 180 as _("Duration of one warm up :")
Code: Select all
<setting name="S_WarmUpNb" type="integer" value="1"/>
<setting name="S_WarmUpDuration" type="integer" value="180"/>
It seems that the warmup duration is good when i launch the server but after skipping the first map, the warmup duration is 8s !
Another thing ! You can also set these values in the "modescript_settings.xml" of uaseco !
Values are (for me) :
Code: Select all
<warm_up_number>1</warm_up_number>
<warm_up_duration>180</warm_up_duration>
Any idea ?
Re: Warm-Up duration problem in "CUP" mode...
I don't know which one takes priority. Did you try to run the server without Uaseco to see if the bug persists? This way you will know if the problem comes from the controller or the game mode.
Who is online
Users browsing this forum: No registered users and 1 guest