Page 1 of 2
Trackmania Updates for ManiaControl, Release v0.220
Posted: 21 May 2017, 20:22
by kremsy
The previous days the ManiaControl-Team worked hard to improve the experience of ManiaControl in Trackmania.
Major Changes:
- Reworked Dedimania Plugin - the Plugin works now and has proper Connection to Dedimania Thanks a lot to Bueddl of "tmserver.org" for this!
- Local Records Plugin has a new designed Widget, showing your Record and places in front and behind you
- Local Records Plugin captures now Lap Records
- Trackmania Plugin for Rounds and Cup (commands for setting point distribution, endround and other stuff)
- Extremly performance improvements, Trackmania Servers with 200 Players can be handled fine with ManiaControl now
- MX List only show Maps of the Trackmania Environment where its played on
- Severall Bug fixes
Thanks a lot to everyone who worked hard on these updates, special Thanks to Jocy and Bueddl!
You can download it here:
https://github.com/ManiaControl/ManiaCo ... tag/v0.220
Re: Trackmania Updates for ManiaControl, Release v0.220
Posted: 06 Jun 2017, 10:54
by chapelier
hey,
Question surely posed full of times but I have not found the answer :
- Is it possible to setup ManiaControl to support multitple Dedicated servers on a single machine ?
Re: Trackmania Updates for ManiaControl, Release v0.220
Posted: 06 Jun 2017, 11:53
by kremsy
Yes it is, but it runs in separate instances using a shared database and a single server.xml config the following way:
Step 1) Create an own ManiaControl.sh for every server (named differently for example ManiaControl1.sh ManiaControl2.sh)
Step 2) Adjust the sh Files to (Example for ManiaControl1.sh)
Code: Select all
#!/bin/sh
php ManiaControl.php -id=server1 -sh=ManiaControl1.sh >ManiaControl.log 2>&1 &
echo $! > ManiaControl.pid
-id is a unique name for the servers and -sh the parameter for the ManiaControl file
Step 3) Add the servers to your servers.xml
Code: Select all
<server id="server1">
<!-- MC Dev Elite -->
<host>ip1</host>
<port>5001</port>
<login>SuperAdmin</login>
<pass>YOUR_PASS</pass>
</server>
<server id="server2">
<host>ip2</host>
<port>5001</port>
<login>SuperAdmin</login>
<pass>YOUR_PASS</pass>
</server>
while the id corresponds to the id in the sh file.
Re: Trackmania Updates for ManiaControl, Release v0.220
Posted: 07 Jun 2017, 13:27
by chapelier
kremsy wrote: ↑06 Jun 2017, 11:53
Code: Select all
<server id="server1">
<!-- MC Dev Elite -->
<host>ip1</host>
<port>5001</port>
<login>SuperAdmin</login>
<pass>YOUR_PASS</pass>
</server>
<server id="server2">
<host>ip2</host>
<port>5001</port>
<login>SuperAdmin</login>
<pass>YOUR_PASS</pass>
</server>
while the id corresponds to the id in the sh file.
I feel confused, for me ip1 et ip2 are the sames and i have 2 differents ports like 5001 and 5002.
But anyway it doesnt worked... did i missed something ?
Re: Trackmania Updates for ManiaControl, Release v0.220
Posted: 07 Jun 2017, 15:45
by kremsy
chapelier wrote: ↑07 Jun 2017, 13:27
kremsy wrote: ↑06 Jun 2017, 11:53
Code: Select all
<server id="server1">
<!-- MC Dev Elite -->
<host>ip1</host>
<port>5001</port>
<login>SuperAdmin</login>
<pass>YOUR_PASS</pass>
</server>
<server id="server2">
<host>ip2</host>
<port>5001</port>
<login>SuperAdmin</login>
<pass>YOUR_PASS</pass>
</server>
while the id corresponds to the id in the sh file.
I feel confused, for me ip1 et ip2 are the sames and i have 2 differents ports like 5001 and 5002.
But anyway it doesnt worked... did i missed something ?
For the Most cases the IPs are the same ofcourse, can you explain more detail what does not work exactly?
Re: Trackmania Updates for ManiaControl, Release v0.220
Posted: 07 Jun 2017, 18:01
by chapelier
The 2 maniaControl instances send their commands to the same server, the first in the server.xml file.
for instance, when i switch the servers in that file, then it is the first which works and the commands are send 2 times.
Re: Trackmania Updates for ManiaControl, Release v0.220
Posted: 07 Jun 2017, 21:14
by kremsy
chapelier wrote: ↑07 Jun 2017, 18:01
The 2 maniaControl instances send their commands to the same server, the first in the server.xml file.
for instance, when i switch the servers in that file, then it is the first which works and the commands are send 2 times.
How does your start sh look like, you sure youve put the right -id argument behind?
Re: Trackmania Updates for ManiaControl, Release v0.220
Posted: 07 Jun 2017, 21:54
by chapelier
here it is :
ManiaControlLagoon.sh
Code: Select all
#!/bin/sh
php ManiaControl.php -id serverLagoon -sh ManiaControlLagoon.sh >ManiaControl.log 2>&1 &
echo $! > ManiaControl.pid
ManiaControlTrial.sh
Code: Select all
#!/bin/sh
php ManiaControl.php -id serverTrial -sh ManiaControlTrial.sh >ManiaControl.log 2>&1 &
echo $! > ManiaControl.pid
and the server.xml
Code: Select all
<server id="serverLagoon">
<host>127.0.0.1</host>
<port>5002</port>
<user>SuperAdmin</user>
<pass>xxxx</pass>
</server>
<server id="serverTrial">
<host>127.0.0.1</host>
<port>5000</port>
<user>SuperAdmin</user>
<pass>xxxx</pass>
</server>
Re: Trackmania Updates for ManiaControl, Release v0.220
Posted: 08 Jun 2017, 11:28
by chapelier
I think the problem is here :
Code: Select all
public static function getParameter($paramName) {
$paramName = (string) $paramName;
$params = self::getAllParameters();
foreach ($params as $param) {
$parts = explode('=', $param, 2);
We need to use "=" for the parameters.
And we need to use "-config=server1.xml" in the command line.
Code: Select all
private function loadConfig() {
$configId = CommandLineHelper::getParameter('-config');
$configFileName = ($configId ? $configId : 'server.xml');
so we need to have 2 xml files.
and now it works !
edit : and having 2 xml files, we can have 2 distinct databases for each server.
Re: Trackmania Updates for ManiaControl, Release v0.220
Posted: 08 Jun 2017, 15:08
by kremsy
chapelier wrote: ↑08 Jun 2017, 11:28
I think the problem is here :
Code: Select all
public static function getParameter($paramName) {
$paramName = (string) $paramName;
$params = self::getAllParameters();
foreach ($params as $param) {
$parts = explode('=', $param, 2);
We need to use "=" for the parameters.
And we need to use "-config=server1.xml" in the command line.
Code: Select all
private function loadConfig() {
$configId = CommandLineHelper::getParameter('-config');
$configFileName = ($configId ? $configId : 'server.xml');
so we need to have 2 xml files.
and now it works !
edit : and having 2 xml files, we can have 2 distinct databases for each server.
You don't need necessaraly two xml files, sorry if I told something wrong, we are going to write a small doku about all commandline parameters soon.
This is a sample line how we use it:
Code: Select all
php ManiaControl.php -id=league13 -sh=ManiaControl13.sh >ManiaControl.log 2>&1 &
so with the -id you don't need -config and can use same config (but than you have the same database ofc).