* LOOPCAM FIX * for Old tracks
I had already reported this issue.
http://forum.maniaplanet.com/viewtopic. ... 70&t=17232
And I hope nadeo does fix this in some way.
However I have found a solution ! The actual problem is for any track from TMN ESWC or TMU (before TMF) any race cam is changed to
default in the MT
It can be fixed if you load the track you want to convert into TMF first, The trick is to play the track (i dont know why this makes a difference but it does) drive to a place where the MT is triggered, it should work correctly, then save. If you drive the whole track be sure to do so slower than the author time so validation is not broken.
Then load the track into TM2 and the cams will work fine ! (load/save it or batch convert it)
I discovered TMF is a bit strange too with old tracks, if they are unconverted they play fine, if they are opened & saved it also breaks Racecams (unless the track is driven before saving).