[B3.1] Canyon Editor: surface Water not 1 block large

Moderator: NADEO

Locked
User avatar
TMarc
Posts: 15255
Joined: 05 Apr 2011, 19:10
Location: Europe
Contact:

[B3.1] Canyon Editor: surface Water not 1 block large

Post by TMarc »

The water is always 2 blocks large.
If you try to make it more narrow, then the ground connects and blocks the river completely.
zarexz

Re: [B3.1] Canyon Editor: surface Water not 1 block large

Post by zarexz »

All other terain is always atleast 2x2 aswell. Only in stadium you can make 1x1 water.
But yeah, we hate long straights, things further appart then one block, etc. Heck, I even whish the tiles were a quarter of the original size so we can really build alot of different things in the same spot :roflol:
Fix
Nadeo
Nadeo
Posts: 1256
Joined: 14 Jun 2010, 17:28

Re: [B3.1] Canyon Editor: surface Water not 1 block large

Post by Fix »

it is a LARGE zone, no river subzone.
User avatar
TMarc
Posts: 15255
Joined: 05 Apr 2011, 19:10
Location: Europe
Contact:

Re: [B3.1] Canyon Editor: surface Water not 1 block large

Post by TMarc »

It is ok if the water needs 2 blocks, because it is somehow in the middle, especially when some radom is applied (yes it works by adding and removing water a few times)

But then please allow the ramps and 45° cliff roads sides to be constructed directly at the water instead of adding one ground block: http://forum.maniaplanet.com/viewtopic. ... 70&t=16867 ;)
Locked

Return to “Trackmania² Canyon Reports”

Who is online

Users browsing this forum: No registered users and 2 guests